Replacing The Lamp - Epson EMP-830 Quick Reference Manual

Replacing the Lamp

How to replace the lamp
Disconnect the
power cable.
Remove the lamp
cover at the side of
the projector.
Loosen the two lamp
fixing screws.
Hold the knob and
pull out the old lamp.
Use the screwdriver that is supplied with the spare lamp or your own cross head screwdriver.
2
1
Remove the cover when the projector has sufficiently cooled
down. It takes about one hour after the power is turned off for the
lamp to become sufficiently cool.
1
Loosen the lamp cover fixing screw.
2
Slide the lamp cover straight out, and then lift it up to
remove it.
16