Epson EMP-830 Quick Reference Manual page 6

To switch using the
Press
remote control...
To select images to be
projected while viewing
all images being input...
(Preview Function)
Move the
cursor to the
desired image.
If the source does not
change to the laptop PC
connected by a
computer cable...
.
Active window
Computer (Analog-RGB)
Easy MP
Computer Computer S-Video Video
If no signal is input, EasyMP is only
the window will appear displayed when using
blue. the EMP-835.
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh Set mirror setting or
display detection.
Computer documentation
1. Press .
If you use any buttons to switch the input source, the preview
window will close and the selected images will be projected.
2. To view details of the image, switch to the active window.
Tilt to select an image and then press
3. Project the images in the active window.
Press .
User's Guide "Selecting an Image Source While
Viewing Projected Images (Preview Function)"
You may need to switch the output source on the computer.
Hold down the key and press the
such as or on it).
Once the setting is changed, projection will start after a short period.
If images are not projected
even after carrying out the
above, press on the
remote control. Interactive
help will be displayed.
You can then answer the
questions to obtain the
optimum settings.
.
key (with a symbol
5