Projection Preparation And Adjustments - Epson EMP-830 Quick Reference Manual

Projector Preparation and Adjustments
Connect the power
cable to the
projector and to an
electrical outlet.
Press .
Simple!
When "Direct Power ON" is set
to "ON", the power will turn on
when the power cable is
connected, without the need to
press .
User's Guide
"List of Configuration Menu
Commands"
Place your fingers against the [
and press in while pulling the lens cover forward to remove it.
A beep will sound and the Power indicator will switch to flashing green.
] and [ ] on the lens cover
Power indicator
Flashing green (warm-up in progress/approx. 30 seconds)
→ Lit green
will not work while warm-up is in progress.
If Password Protect has been enabled, the password entry
screen will be displayed. Enter the password.
User's Guide "Preventing Theft (Password Protect)"
User's Guide "Turning the Projector On"
To use the remote control, set the
[R/C] switch to "ON".
3