Setup; Connections - Epson EMP-830 Quick Reference Manual

Set up the projector so that the distance from the screen to the projector's lens is 86–1473 cm (2.8–

Setup

48.3 ft.). The shorter the distance between the two, the smaller the image will be, and the greater the
distance, the larger the image will be. Adjust the distance in accordance with the size of the screen.

Connections

When connecting to
a computer or video
source
The [Audio] port to use is
the port that is in the same
box as the port being used
to input the image signals.
However, if component
video signals are being
input from a DVD player or
some other equipment to
the [Computer1 (or2)/
Component] port, you can
use either of the two types
of audio input ports shown
below depending on the
audio cable type you use.
When connecting
When connecting
to the [Computer2/
to the [Computer1/
Component] port
Component] port
Be sure to turn the power off for all components
before making any of the following connections.
RCA video RCA audio
cable cable
(commercially- (commercially-
available) available)
To audio
output port
Video
Video source such as DVD player, VHS video player, RGB converter or video distributor
* The port name may vary depending on the equipment being connected.
Either the left or right port can be connected.
Mini plug
audio cable
(commercially-
available)
S-Video RCA audio
cable cable
(commercially- (commercially-
available) available)
To audio
S-Video output port
User's Guide
"Screen Size and
Projection Distance"
User's Guide "Connecting to a Computer"
"Connecting to a Video Source"
To audio
output port
Component
Computer cable or
video cable
VGA-HD15
(optional)
PC cable
(accessory or
optional)
Component
Computer
1