Introduction; Device Description; Scope Of Delivery; Proper Use - Scheppach HC25Si Manual

1. Introduction

Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
This operating manual should help you familiarise
yourself with your power tool and teach you how to
use it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this operat-
ing manual, you must also observe the regulations
applicable to the operation of the power tool in your
country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work. The power tool may only be used
by personnel who have been trained to use it and who
have been instructed with respect to the associated
hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
6
2. Device description (fig. 1-10)
1. Transport handle
2. Pressure switch
3. On/off switch
4. Air filter
4a. Filter housing
4b. Filter element
4c. Filter cover
4d. Hose
5. Wheel
5a. Fillister head screw
5b. Washer
5c. Spring washer
5d. Nut
6. Drain screw for condensate
7. Supporting foot
7a. Screw
7b. Nut
7c. Spring washer
8. Pressure vessel
9. Safety valve
9a. Exhaust nut
9b. Connection lock
9c. Cap of exhaust nut
10. Quick coupling (regulated compressed air)
11. Quick coupling (regulated compressed air)
12. Pressure gauge (set pressure can be read off)
13. Pressure gauge (vessel pressure can be read off)
14. Pressure regulator
15. Transport lid

3. Scope of delivery

1x air filter
1x supporting foot
2x wheel
1x assembly material
1x operating manual

4. Proper use

The compressor is designed to generate compressed
air for compressed-air driven tools which can be driv-
en with an air volume of up to approx. 110 l/min (e.
g. tire inflator, blow-out pistol and paint spray gun).
Due to the limited air output it is not possible to use
the compressor to drive tools with very high air con-
sumption (for example orbital sanders, die grinders
and hammer screwdrivers).
The compressor may only be operated in a dry and
well ventilated indoor space.
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.