Table of Contents
Advertisement
2. The parking lights will flash twice and the LED will turn off to confirm that the doors have
been unlocked and that the Starter Kill feature is disarmed if it was installed.
To
your doors and a r m the Starter Kill:
l o c k
1. Press and hold the
2. The parking lights will flash once and the LED will flash slowly to confirm that the doors have
been locked and that the Starter Kill feature is enabled if it was installed.
Priority Door Access
When programmed, this safety feature lets you unlock solely the driver's door with a single
press of the
button on the transmitter; upon a second press of the
UNLOCK
other doors will unlock.
Arming the Starter Kill
If installed, the Starter Kill can be programmed to arm in Active Mode (will not arm
automatically) or in Passive Mode (will arm automatically). See p. 7 for more details on arming
modes.
• To disarm the Starter Kill in Active or Passive Mode, press the
mitter. The parking lights will flash twice. (If Remote Door Locks were installed, this will also
unlock the doors.)
• To arm the Starter Kill in Active or Passive Mode, press and hold the
transmitter. The parking lights will flash once. (If Remote Door Locks were installed, this will
also lock the doors). In Passive Mode, the Starter Kill will automatically rearm 1 or 3 minutes
after the doors were unlocked unless the ignition key has meanwhile been inserted in the
ignition switch (if Key Sense is installed – see p. 8).
Installation-programmable Options
This Unit was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can single-handedly control nearly any electrical system in your vehicle.
Note: The programming of your system should be left to a professional. Changing any one
of the settings may affect the operation of your Unit.
The user-selectable options are as follows:
•
Remote Door Locks
•
Safe Start
•
Starter Kill / Anti-grind feature
•
Passive / active arming of the Starter
Kill
•
Idle Mode
•
Ignition-controlled Door Locks
•
Smart Ignition Locks
•
Secure Lock
Remote Door Locks Option
If your system was installed with the Remote Door Locks option, you will have the convenience
of remote keyless entry. See p. 5 for operation details.
Safe Start
If this feature is enabled, it will require the user press the
to remote-start the vehicle. If the Swap Start Mode is selected, to remote-start your vehicle
press
and
LOCK
UNLOCK
This will eliminate accidental remote starts – for example: when there are children playing with
the remote control.
Under Safe Start, you can activate Cold Weather Mode by
• Pressing the
START
• Pressing and holding the
P. 6
button for approx. 1 sec.
LOCK
simultaneously.
button, and then
button again until the parking lights flash 3 times.
START
UNLOCK
•
Priority Door Access
•
Remote Trunk Release
•
Horn
Confirmation
Mode)
•
Engine Run Time
Key Sense
•
•
,
and
AUX 1
AUX 2
•
Multi-car Operation
button 2 times within 3 seconds
START
User Guide AS-1525 SH
button, all the
UNLOCK
button on the trans-
button on the
LOCK
(Panic
outputs
AUX 3
Advertisement
Table of Contents
