XIEGU X6100 Manual page 10

II. Screen Display Interface
① Status display area 1
This area displays SPL, ATU, SQL, NB, NR and
ANF switch status.
② Volume tag
Display volume/noise level/RF gain adjustment.
Short press the volume knob to switch the above
three status.
③ Multi-function tag
The figure shows the transmitting power
adjustment tag. Items of the tag displayed can be
rapidly set via menu.
④ Spectrum display area
It displays the signal strength of about -122dBm
at minimum
⑤ Waterfall plot display area
⑥ Multi-function menu area
Short press the corresponding button at the
bottom of the screen to operate corresponding
functions.
⑦ Main VFO frequency display area
⑧ Status display area 2
This area displays the status including lock/USB
port/Bluetooth/WLAN/battery/volume.
⑨ VFOB display area
⑩ Status display area 3
This area displays PRE/ATT/mode /AGC status
Table header area
This area displays S table and CW frequency aligned
windows
Signal strength dBm display
10