Wired (Ethernet) Network Setup - Epson Stylus Photo R3000 Series User Manual

6. When you see this screen, select
network
7. Wait while the software is installed.
8. Follow the instructions on the screen to install the rest of your software.
9. When installation is complete, remove the CD and restart your computer.

Wired (Ethernet) Network Setup

The steps in this section provide detailed instructions for setting up your product
on a wired (Ethernet) network.
Note:
If you're having trouble setting up your product, see "Network Problems" on page 60.
1. Make sure your product is turned on.
Note:
If you previously set up the product on a wireless network, you must disable the
wireless connection before you can connect to a wired network. Press OK
select Setup, Network Settings, Wireless LAN Setup, Disable Wireless LAN.
Select Yes, then press
2. Insert the product software CD.
3. Windows 7 and Windows Vista: If you see the AutoPlay window, click
Setup.exe
Continue
Mac OS X: Double-click the
54
Network Setup
, then click .
Next
OK
.
. When you see the User Account Control screen, click
.
The printer is already on my wireless
icon.
Epson
,
then
Run
or
Yes