Epson Stylus Photo R3000 Series User Manual page 26

Note:
In certain programs, you may need to select Advanced before you can select
Printer Settings. For more information about print settings, click the
7. Select the
page 28).
Note:
The ink type will change depending on the size and type of paper you select. To
avoid changing black ink more often than necessary, switch the printer to the type
of black ink you usually use (see page 43).
8. For the
Print Mode
photographic printing. To print black-and-white photos using
B&W Photo
9. Select one of the following as the
■
Epson Standard (sRGB)
■
Adobe RGB
Use this setting if your source file was captured in Adobe RGB.
Note:
For color management instructions, see http://www.epson.com/SPR3000Profiles.
For more information about print settings, click Help or see your online User's
Guide.
10. Select an
media type):
■
Draft
■
Fine - 720dpi
■
SuperFine - 1440dpi
and speed
■
Photo - 1440dpi
slower speed
■
SuperPhoto - 5760dpi
(best to use for canvas media)
11. Click
Print
26
Printing From Start to Finish
setting that matches the paper you loaded (see
Media Type
setting, select
mode, see your online User's Guide for instructions.
matches images colors to the Adobe RGB color standard.
Output Resolution
: for fast printing with draft quality
: for everyday text and image printing
: for photos and graphics with good print quality
: for photos and graphics with high print quality and
.
AccuPhoto HD2
Color Mode
increases the contrast in images.
setting (available settings depend on selected
: for the best print quality and slowest print speed
for any type of
Advanced
setting:
?
button.