Epson Stylus Photo R3000 Series User Manual page 51

3. When you see this screen, do one of the following:
■
If your wireless network has security enabled, use the printer buttons to
enter your network password. If your password has uppercase (
lowercase (
■
If your wireless network doesn't have security enabled, continue with
step 4.
Note:
If you're having trouble entering your network password, click Watch video
overview to watch a short video tutorial on how to enter your network password.
4. Follow the on-screen instructions to finish selecting network settings.
Note:
If you see a firewall alert message, click Unblock or Allow to let EpsonNet Setup
continue and click
or Block.
If you see a network setup failed message, the network password may have
been entered incorrectly. If your password has uppercase (
( ) letters, or numbers (
abc
Note:
If the product still doesn't connect to your wireless network, see "Network setup
failed" on page 60.
5. Wait while the software is installed, then follow the on-screen instructions.
6. When installation is complete, remove the CD and restart your computer.
) letters, be sure to enter them correctly. Then go to step 4.
abc
Next
if necessary. Do not select Ask Me Later, Keep Blocking,
), be sure to enter them correctly.
123
) or
ABC
) or lowercase
ABC
Network Setup
51