Epson Stylus Photo R3000 Series User Manual page 23

Note:
For color management instructions, see http://www.epson.com/SPR3000Profiles.
For more information about print settings, click Help or see your online User's
Guide.
7. Choose the paper
■
: for sheets of paper loaded in the sheet feeder.
Sheet
■
Roll Paper
desired, click
photo.
■
Roll Paper (Banner):
long. If desired, click
paper between each banner.
■
Front - Fine Art
feed tray (see page 8 for loading instructions).
■
Front - Poster Board:
(see page 14).
■
: for a disc loaded in the CD/DVD tray (see page 30 for printing
CD/DVD
instructions).
8. Select the paper
If you loaded roll paper, create a custom paper size. Select
the Size menu, then click the
custom size. For the Paper Width, enter
rolls. For the Paper Height enter the desired length up to 44 inches. Click
, click
Save OK
Note:
For roll paper, make sure the maximum width of your photo is 8.3 or 13 inches to
fit in the width of your roll paper (set the margins to 0 in your application software).
9. If you're printing borderless photos, select
the borderless expansion setting click
10. To reduce or enlarge your printout or print double-sided, click the
tab and select settings as necessary. (Click
Layout
User's Guide for details.)
11. Click to save your settings.
OK
12. Click or
OK Print
in which you loaded your paper:
Source
: for photos or panoramics up to 27 inches (68.6 cm) long. If
Print page frame
for photos or banners over 27 inches (68.6 cm)
Save Roll Paper
: for a sheet of compatible paper loaded in the manual
for thick media loaded in the manual feed tray
setting for the paper you loaded.
Size
User Defined
, then select your custom paper size in the
to start printing.
to print a cutting guideline around each
to feed small amounts of roll
button. Type a name for your
for A4- or
8.3
, if available. To adjust
Borderless
.
Expansion
Help
Printing From Start to Finish
User Defined
for Super B-size
12.95
menu.
Size
Page
or see your online
in
23