Epson Stylus Photo R3000 Series User Manual page 50

Setting Up With the Printer Buttons
If you are using Mac OS X 10.6, or you don't have a USB cable to set up the
product on your wireless network, follow these steps to set it up using the printer
buttons:
1. Follow the instructions on the screen to start the product's wireless Setup
Wizard.
2. When you see this screen, use the printer buttons to select the name of your
wireless network, then press
If your network name isn't listed, try the following:
■
Make sure that your wireless router or access point is turned on and
working correctly. Press
select
■
If you still can't find the network name in the list, your router or access
point is not broadcasting its network name. Press u or d to select
SSIDs
Manually" on page 52.
50
Network Setup
, then repeat step 2.
Setup Wizard
, then press . Continue with the steps in "Entering Your SSID
OK
. When you're finished, click
OK
to return to the previous screen, press
y
.
Next
to
OK
Other