Cleaning The Print Head - Epson Stylus Photo R3000 Series User Manual

Cleaning the Print Head

If print quality has declined and the nozzle check indicates clogged nozzles, you
can clean the print head. Print head cleaning uses ink, so clean it only if necessary.
Note:
You cannot clean the print head if an ink cartridge is expended, and may not be able to
clean it when a cartridge is low. You must replace the cartridge first (see page 39).
1. Load a few sheets of plain paper.
2. Press
OK
3. Select
Setup
4. Press
OK
Cleaning lasts around 2 minutes. When it's finished, you see a message on the
LCD screen.
Caution:
Never turn off the product during head cleaning or you may damage it.
5. Select
Nozzle Check
Note:
If you don't see any improvement after cleaning the print head four times, leave the
product on and wait at least six hours to let any dried ink soften. Then try cleaning the
print head again. If quality does not improve, one of the ink cartridges may need to be
replaced. If that doesn't help, contact Epson as described on page 61.
If you do not use your product often, it is a good idea to print a few pages at least once
a month to maintain good print quality.
36
Maintaining Your Printer
to open the menu screen.
, select
Maintenance
.
to confirm that the print head is clean.
, then select
Head Cleaning
.