NOTE:
When the drive select lever is in the
●
neutral position, the neutral indicator
light should come on. If the neutral
indicator light does not come on, ask a
service center to inspect the electric
circuit.
The engine can be started in any gear if
●
the brake is applied. However, it is
recommended to shift into neutral before
starting the engine.
3. Use the starter (choke) in reference to
the figure:
Position①: Cold engine start ambient
temperature below 41°F (5℃)
Position②: Cold engine start ambient
temperature at 32°F - 86°F
(0℃ - 30℃).
Position③: Cold engine start ambient
temperature above 86°F (30℃)
a. Choke knob
2. Half open
4. With your foot off the accelerator pedal,
start the engine by turning the key to
"START".
Operation
6-2
1. Fully open
3. Closed