Coleman HS400UTV-2 Owner's Manual page 54

4-29 Control Functions
Front and Rear Shock Adjustment(Option 2)
WARNING
These shock
contain highly pressurized nitrogen gas,
read and understand
information before handling the shock
absorber assemblies.
·Do not tamper with or attempt to open
the cylinder assemblies.
· Do not subject the shock absorber
assemblies to an open flame or other
high heat source. This may cause the unit
to explode due
pressure.
·Do not deform or damage the cylinders
in any way. Cylinder damage will result in
poor damping performance.
absorber assemblies
the following
to excessive
·Do not dispose of a damaged or worn
out shock absorber assembly yourself.
Take the shock absorber assembly to a
HSUN dealer for any service.
The spring preload, rebound damping and
compression damping forces of the front
and rear shock absorber assemblies can be
adjusted to suit the operating conditions.
NOTE:
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
gas