Coleman HS400UTV-2 Owner's Manual page 69

Steering Wheel Inspection
Check the steering wheel for specified freeplay
and smooth operation。
1. Position the vehicle on level ground.
2. Lightly turn the steering wheel left and right.
3. There should be 0.8"-1.0" (20-25 mm) of
freeplay.
If there is excessive freeplay, strange noises, or
steering feels rough or "catchy", have the
steering system inspected by an authorized
service center。
Seat Belts
Make sure that both seat belts are not frayed or
damaged.
The seat belt must move smoothly when pulled
out and retract on its own when released. The
latch plate should click securely into the buckle
Pre Operation Checks
and release when the release button is pushed
firmly. Wash off any dirt or mud which could
affect operation. Have a service center repair as
necessary.
Fittings and Fasteners
Always check the tightness of the chassis
fittings and fasteners before each ride. Take the
vehicle to a service center or refer to the
Service Manual for correct torque specs.
Lights
Check the headlights and tail/brake lights to
make sure they are in good working condition.
Repair as necessary for proper operation.
Switches
Check the operation of all switches. Have a
service center repair as necessary.
5-10