Coleman HS400UTV-2 Owner's Manual page 35

Switches
1. Light switch "OFF/
/
Light Switch "OFF/
Set the switch to "
and the taillights.
"
"
/
"to turn on the low beam
Control Functions
Set the switch to "
beam and the taillights.
Set the switch to "OFF" to turn off all lights.
CAUTION:
Do not use the headlights with the engine
turned off for an extended period. The battery
may discharge to the point that the starter
motor will not operate properly. If this should
happen, remove the battery and recharge it.
"to turn on the high
4-10