Coleman HS400UTV-2 Owner's Manual page 33

means the differential is not operational and
is locked. When riding an UTV on muddy and
slippery roads or when climbing a steep hill,
make sure the 4WD lock indicator is on.
When riding on a flat road at a comparatively
high speed, adjust
"2WD/UNLOCK"
symbols in either of the 4WD indicators.
Riding the UTV while the differential
functioning and is NOT locked, may improve
the stability and safety of the UTV during
operation.
CAUTION:
When the selector is set to 4WD, the right
4WD symbol front axle will have an 'X' in the
middle . When riding on good surfaces you
the settings
where there are
should unlock the differential and press in
the yellow and the gray buttons to the 2WD
unlocked position. There should be no
symbols showing in either the left or right
4WD indicators.
to
no
CAUTION:
If the display indicators flash or the
is
speedometer does not show the speed while
the UTV is in motion, Ask a dealer to check
the speed sensor and circuits.
Fault code indicator
When the EFI encounters faults, the ECU will
send the fault code to the instrument display,
and it will flash on the clock.
Control Functions 4-8