7
8
9
10
1. Capscrew
2. Cap
3. Crankshaft
4. Thrust Washer
5. Rotor Drive Key
7.8.3
Compressor Reassembly
Clean all compressor parts, use a suitable solvent with proper precautions. Coat all moving parts with the proper
compressor oil before assembly. Refer to
7.8.4
Preparation
a. Suction and Discharge Valves
If the valve seats look damaged or worn, replace valve plate assembly. Always use new valves because it is diffi-
cult to reinstall used valves so that they will seat as before removal. Any valve wear will cause leakage.
Suction Valve
Suction Valve Positioning Spring
Valve Plate Dowel Pin
T-316
Figure 7.13 Crankshaft Assembly
6
- - - - -
Table 7–7
for applicable compressor torque values.
Figure 7.14 Suction Valve & Positioning Springs
7–14
5
3
2
1
6. Connecting Rod
7. Compression Ring
8. Piston
9. Pin
10. Retainer
4