1
5
1. Oil Pump & Bearing Head
2. Thrust Washer
3. Oil Pickup Tube
If the oil pump was not operating properly, the entire oil pump & bearing head assembly must be
replaced. Individual parts are not available. If the pump requires inspection or cleaning, disassemble
and reassemble by referring to
oil before proceeding with reassembly.
3
2
1
1. Capscrews
2. Cover
3. Reversing Assembly
4. Pinion
5. Gear
6. Drive
T-316
Figure 7.9 Oil Pump and Bearing Head
4
Figure
7.10. Clean all parts and coat all moving parts with compressor
Figure 7.10 Low Profile Oil Pump
7
6
5
4
Set screw must be removed.
2
4. Oil Inlet Port
5. Oil Pump Inlet
- - - - -
NOTE
9
8
7. O-Ring
8. Oil Pump & Bearing
9. Set Screw
10. Relief Valve
11. Pin
12. Gasket
- - - - -
7–12
3
12
11
10