U-Line H-1789 Quick Start Manual

Stock picker carts

Hide thumbs Also See for H-1789:

H-1789, H-1790, H-2082

H-2653, H-2654, H-2655

STOCK PICKER CARTS

TOOLS NEEDED

Rubber Mallet

7/16" Wrench

In addition to the 4 posts, 4 shelves, 4 inserts, 4 bolts

and shelf supports from the Chrome Wire Shelving, this kit

includes the following:

Caster x 4

Back Panel

Bracket x 4

Nut x 8

PAGE 1 OF 3

1-800-295-5510

uline.com

Side Panel x 2

Back Left Panel x 1

Back Right Panel x 1

0715 IH-1789

Table of Contents

Do you have a question about the H-1789 and is the answer not in the manual?

Page 1 H-1789, H-1790, H-2082 π 1-800-295-5510 H-2653, H-2654, H-2655 uline.com STOCK PICKER CARTS TOOLS NEEDED Rubber Mallet 7/16" Wrench PARTS LIST In addition to the 4 posts, 4 shelves, 4 inserts, 4 bolts and shelf supports from the Chrome Wire Shelving, this kit...
Page 2 ASSEMBLY INSTRUCTIONS INSTALL CASTERS 3. Slide posts through underside of shelf until shelf slides firmly over shelf supports. (See Figure 3) 1. Make sure post is positioned as shown. 4. Stand unit upright. Gently tap shelf down to secure. (See Figure 1) (See Figure 4) 2.
Page 3 ASSEMBLY INSTRUCTIONS CONTINUED 4. Assemble the side panels with the loops on the top 3. After all the loops are lined up on top of the metal facing inward. Tilt the panel so it locks around the inserts on the top of the posts, screw in the bolt on all posts on both ends and then slide down so the loops four posts and tighten using wrench.

H-1790 H-2082 H-2653 H-2654 H-2655