Cleaning And Maintenance; Service Centre - Concept2 VK571 Series Manual

Hide thumbs Also See for VK571 Series:

Manual (89 pages)

Table Of Contents

Table of Contents

Available languages

ADDITIONAL DISPLAYED INFORMATION

If "Lo" sign appears on the display (Fig. 1) or the display does not display anything after

turning the appliance on, the batteries are flat and must be replaced with new ones.

If "EEEE" sign appears on the display (Fig. 2) the appliance has been overloaded

and may be damaged. Immediately reduce the amount of food.

COUNTDOWN TIMER SETTING

1. In the time display mode, press the SET/UNIT button to enter the countdown timer

function, or press and hold the SET/UNIT button for 2 seconds. The default setting

is 1 minute (Fig. 3).

2. Press the SET/UNIT button to enter the countdown function. Press the ON/ZERO

button to set minutes. Each time you press the SET/UNIT button, you will increase

the countdown time by one minute (Fig. 4). Press and hold the SET/UNIT button,

you can speed up the increasing of the countdown time.

3. Press the ON/ZERO button to set seconds. Each time you press the SET/UNIT button,

you will increase the countdown time by one second (Fig. 5). Press and hold the

SET/UNIT button, you can speed up the increasing of the countdown time. Press

the ON/ZERO button to start the countdown.

CANCELING COUNTDOWN TIMER

1. During the countdown, press the SET/UNIT button to stop the countdown. Press the SET/UNIT button again to

restart the countdown.

2. During the countdown, press the SET/UNIT button to stop the countdown. Press the ON/ZERO button to reset the

data.

Press and hold the ON/ZERO button for 2 seconds and the time will appear on the display.

AUDIO SIGNALISATION

A sound signal appears when the countdown is complete. The sound signal takes one minute.

Press the SET/UNIT button again to restart the countdown. Press the ON/ZERO button to reset the original values.

VK571x

TIME SETTING

1. When the batteries are installed, time will appear on the display.

2. Press and hold the SET/UNIT button for 2 seconds to set the clock. Each time you press the SET/UNIT button, one

hour will be add (the 12 will switch to the 24 hour time format).

Fig. 1

3. Press the ON/ZERO button to set the minutes. Each time you press the SET/UNIT button, one minute will be add.

4. Press the ON/ZERO button to complete the setting.

Switching between the 12 and 24 hour time format:

Fig. 2

Enter the time setting mode.

For example if you want to set time for 11:00 at night, select the 12 hour time format.

Fig. 3

For example if you want to set time for 23:00 at night, select the 24 hour time format.

IMPORTANT

Fig. 4

1. Place the scale on a flat and dry work area.

2. The weighing range is 3 g - 15 kg.

3. This scale is a highly accurate electronic device. Be careful not to drop it or make too much pressure on it, it may

get damaged.

4. To clean the surface use a soft cloth, never use any chemical solution.

5. The appliance is intended for home use only. Never use a force on the scale to avoid damage.

Fig. 5

6. If you have any questions or concerns, please do not hesitate to contact our info line.