Remote Programming And Monitoring; Local Networks - Omron SYSMAC CS1W-RPT01 Operation Manual

Remote Programming and Monitoring

7-2 Remote Programming and Monitoring
7-2-1

Local Networks

SYSMAC Support Software and CV Support Software
SYSMAC Support
Software
SYSMAC Support
Software (CVM1 only)
or
CV Support Software
240
A remote PLC can be programmed and monitored across a network from a
Programming Device connected to a PLC.
A Programming Device connected to a C200HX/HG/HE, CVM1, or CV-series
CPU Unit can program and monitor a C200HX/HG/HE, CVM1, or CV-series
PLC on the same network. Programming and monitoring are possible, how-
ever, only for the same type of CPU Unit as the one to which the Programming
Device is connected. For example, if the Programming Device is connected to
a CVM1 or CV-series PLC, you can only program and monitor CVM1 or CV-
series PLCs on the network.
Programming Device
C200HX/HG/HE
Programming Device
CVM1, or CV-series PLC
Note A factory automation node computer cannot remotely program or
monitor. The node can only monitor Controller Link Network status.
Controller Link
Support Software
Controller Link Network
C200HX/HG/HE
Controller Link Network
Section 7-2
Programming
and monitoring
Programming
and monitoring
CVM1, or CV-series PLC