Omron SYSMAC CS1W-RPT01 Operation Manual page 41

Specifications and Configurations
Communications Specifications when Using the CS1W-RPT01 Repeater Unit in a Wired
Network
Note
16
CS1W-CLK21-V1, CS1W-CLK23, CJ1W-CLK21-V1, CJ1W-CLK23,
3G8F7-CLK21-V1, and 3G8F7-CLK23-E
2. Using 62,000 data link words is possible with a configuration containing 62
nodes.
Item
Transmission path form
Baud rate and maximum trans-
mission distance (See note 2.)
Maximum number of nodes
Maximum number of Repeater
stages (See note 4.)
1. Specifications within a segment are identical to the specifications of a
Wired Controller Link Network.
2. Maximum transmission distance: Total length of cables in the longest path
connecting any two nodes.
3. A maximum of 62 nodes is possible only when using CS1W-CLK21-V1,
CS1W-CLK23, CJ1W-CLK21-V1, CJ1W-CLK23, 3G8F7-CLK21-V, and
3G8F7-CLK23-E Units.
4. Maximum number of Repeater stages: The maximum number of Repeater
Units that can be inserted into the path connecting any two nodes. For
wire-to-optical connection, two Repeater Units make up a single set, which
is counted as a single Repeater stage.
5. The Repeater Units each have a unique node address. Up to 32 Units,
consisting of Controller Link Units and Repeater Units, can be connected
within a single segment.
Wire
Within 1 segment
(See note 1.)
Multi-drop
2 Mbps: 500 m
1 Mbps: 800 m
500 Kbps: 1 km
Total number of Control-
ler Link Units + Repeater
Units: 32 nodes (See
note 5.)
---
: Controller Link Unit/Support
Board
: Wire-to-wire Repeater Unit
Optical
: Wire-to-optical Repeater Unit
fiber
(two Units used in a pair)
cable
: Range of a single segment
Note: The Repeater Unit will be
counted in the number of
nodes for each segment that
it is connected to.
Section 1-2
Entire network
Tree type (Connection of
segments with Repeaters)
2 Mbps: 1.5 km
1 Mbps: 2.4 km
500 Kbps: 3.0 km
Controller Link Units/Sup-
port Boards (See note 3.):
62 nodes
2 stages