Graco ProBell 24Z221 Instructions And Parts page 4

Warnings
EQUIPMENT EQUIPMENT EQUIPMENT MISUSE
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated
system component. See Technical
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical
Specifications in all equipment manuals. Read fluid and solvent manufacturer's warnings.
Specifications Specifications
For complete information about your material, request the Safety Data Sheet (SDS) from
distributor or retailer.
• Turn off all equipment and follow the Pressure
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer's replacement parts only.
• Do not alter or modify equipment. Alterations or modifications may void agency approvals
and create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work location.
• Comply with all applicable safety regulations.
PERSONAL PERSONAL PROTECTIVE PERSONAL
Wear appropriate protective equipment when in the work location to help prevent serious
injury, including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective
equipment includes but is not limited to:
• Protective eyewear, and hearing protection.
• Respirators, protective clothing, and gloves as recommended by the fluid and solvent
manufacturer.
4
WARNING WARNING WARNING
MISUSE HAZARD MISUSE HAZARD HAZARD
Technical Specifications Technical
PROTECTIVE EQUIPMENT PROTECTIVE EQUIPMENT EQUIPMENT
Specifications in all equipment manuals. Specifications
Pressure Relief Pressure Relief Procedure Relief Procedure when equipment is not in use. Procedure
Technical Technical
3A3954D