Table of Contents
Advertisement
Code
Description
• Incompatibility (Exam-
09
ple; no document in
local system while
polling RX)
• TX failure due to mis-
match of communica-
tion type and/or
transmission speed
• Error in F code TX
10
• Error in F code RX
11
(2)
Terminal alarm
Code
Description
• Memory overflow or
45
nearly full
• Document jamming
46
• "No print paper" or
47
"Side cover opened"
were detected
Cause - Re: Remote, Li: Line, Lo: Local
Cause
Error in operation on
remote side
Transmission
speeds are set 4800/
2400 bps. Remote
machine has only
V.29.
Failure in remote
machine
Failure in remote
machine
Cause - Re: Remote, Li: Line, Lo: Local
Cause
Memory overflows or
nearly full
Feeding is not work-
ing continuously.
Jamming in a long
document or in the
middle of a page
(Feeding is not com-
pleted even if feed-
ing exceeds 1 m.)
Out of print paper
Side cover was
opened while RX
T-3
Remedy
Re
Li
Lo
Ask the remote end
to reload the docu-
ment again.
Check the soft
switch (MODE 049
Bit 4 -0).
Check the maximum
transmission speed
for each one-touch
dialing (only for reg-
istration in mainte-
nance features).
Check the status of
the remote machine.
Check the status of
the remote machine.
Remedy
Re
Li
Lo
Reset the terminal
alarm and ask the
remote end for
resending.
Reload a document.
Reload a document.
Load print paper.
Close the side
cover.
Advertisement
Table of Contents
