Table of Contents
Advertisement
EVGA Z390 DARK (131-CS-E399)
POST Codes
This section provides the AMI POST Codes
for the EVGA Z390 DARK Motherboard
during system boot up. The POST Codes are
displayed on the Debug LED readout located
directly on the motherboard. See Page 14 and
15, component 21 of the Component Legend
for physical location.
This Debug LED will switch to display the
user's 80Port Configuration settings after POST (see Page 149). Please note
that if you see the Debug LED constantly switching numbers after entering
Windows, the Debug LED is showing temperature or voltage information, and
is NOT reporting errors.
AMI POST Codes
1
Power on. Reset type detection (soft/hard).
2
AP initialization before microcode loading
3
North Bridge initialization before microcode loading
4
South Bridge initialization before microcode loading
5
OEM initialization before microcode loading
6
Microcode loading
7
AP initialization after microcode loading
8
North Bridge initialization after microcode loading
9
South Bridge initialization after microcode loading
0A
OEM initialization after microcode loading
0B
Cache initialization
0C-0D Reserved for future AMI SEC error codes
0E
Microcode not found
Debug LED with CPU
Temperature Monitor
- 153 -
Advertisement
Table of Contents
