Post Codes; Ami Post Codes - EVGA Z690 CLASSIFIED User Manual

EVGA Z690 CLASSIFIED (121-AL-E698)

POST Codes

This section provides the AMI POST Codes for
the EVGA Z690 CLASSIFIED Motherboard
during system boot up. The POST Codes are
displayed on the Debug LED readout located
directly on the motherboard. See Page 12 and 13,
component 19 of the Component Legend for physical location.
This Debug LED will switch to display the user's 80Port Configuration settings
after POST (see Page 150). Please note that if you see the Debug LED
constantly switching numbers after entering Windows, the Debug LED is
showing temperature or voltage information, and is NOT reporting errors.

AMI POST Codes

1 Power on. Reset type detection (soft/hard).
2 AP initialization before microcode loading
3 North Bridge initialization before microcode loading
4 South Bridge initialization before microcode loading
5 OEM initialization before microcode loading
6 Microcode loading
7 AP initialization after microcode loading
8 North Bridge initialization after microcode loading
9 South Bridge initialization after microcode loading
0A OEM initialization after microcode loading
0B Cache initialization
0C-0D Reserved for future AMI SEC error codes
0E Microcode not found
Debug LED with CPU
Temperature Monitor
- 154 -