Table of Contents
Advertisement
EVGA Z790 CLASSIFIED (121-RL-E798)
POST Codes
This section provides the AMI POST Codes for
the EVGA Z790 CLASSIFIED Motherboard
during system boot up. The POST Codes are
displayed on the Multi-function Display readout
located directly on the motherboard and can be
used to help troubleshoot pre-boot issues. See Pages 12 and 13, component 17
of the Component Legend for physical location.
This display will switch to show the user's Multi-function Display settings after
POST (see Page 110). Please note that if you see the display constantly
switching numbers after entering Windows, the display is showing temperature
or voltage information, and is NOT reporting errors.
AMI POST Codes
1
Power on. Reset type detection (soft/hard).
2
AP initialization before microcode loading
3
North Bridge initialization before microcode loading
4
South Bridge initialization before microcode loading
5
OEM initialization before microcode loading
6
Microcode loading
7
AP initialization after microcode loading
8
North Bridge initialization after microcode loading
9
South Bridge initialization after microcode loading
0A
OEM initialization after microcode loading
0B
Cache initialization
0C-0D Reserved for future AMI SEC error codes
0E
Microcode not found
Multi-function Display with
Temperature Monitor
- 113 -
Advertisement
Table of Contents
