When Using This Unit With A Wired Lan Connection - Panasonic KV-N1058X Operating Manual

4.3.2 When using this unit with a wired LAN connection

4.3.2 When using this unit with a wired LAN connection
For details about network-related settings, consult your network administrator.
1.
Insert the Software / Manual CD-ROM into the CD/DVD drive on your computer.
•
If the AutoPlay dialog box is displayed, select [CDRun.exe].
•
If the setup window does not appear, double-click [CDRun.exe] in the Software / Manual CD-ROM.
•
When the model selection screen is displayed, select the correct model to use.
2.
Check the [Read me first] file.
3.
Select the desired installation methods from "Software" on the left side of the screen.
•
If you selected [Custom], select the items that you want to install. If you select TWAIN or ISIS, Image
Capture Plus will also be installed.
4.
Follow the instructions on the screen and complete the installation.
•
Select [Wired LAN] as the connection method for the scanner.
•
Restart your computer if you are prompted to do so.
•
If multiple scanners are displayed, select the scanner with the same host name as the unit. You can
confirm the host name of the unit as follows.
i.
Touch the icon (
ii.
Touch [Network Setting].
When using a DHCP server:
Select [Automatic Configuration (DHCP)] for the IP address.
If the unit cannot connect to the network, confirm whether the DHCP server is running correctly.
When not using a DHCP server:
Select [Manual Configuration (Static IP)] for the IP address.
Connect the unit to your computer via USB, following the instruction on the screen. Then, configure the
network settings (page 136).
Notice
•
After the installation is complete, check that the network-related functions are configured correctly.
•
If you are not using this scanner with a USB connection, remove the USB cable.
24
) on the home screen.