When Scanning With The Flatbed Repeatedly - Panasonic KV-S6050W Operating Instructions Manual

Loading Documents on the Flatbed
5
Close the document cover gently.
•
If the document cover is slammed, the
document will move and may not be
scanned properly.
• Do not open or press down on the
document cover during scanning.
• Do not look directly at the light.
(You may damage your eyes.)
• Be sure to close the document cover
before use.
• After scanning, open the document cover
and remove the document.
∫ ∫ ∫ ∫

When scanning with the flatbed repeatedly

The ADF is heavy so when scanning with the flatbed repeatedly, separate the ADF and document cover.
1
Pull the exit document stopper towards
you, pull the front door release under
the hopper, separate the ADF and
document cover, and lift up the ADF to
open.
2
Perform operation steps 1 through 5
for scanning with the flatbed one time.
(See pages
38
37 and 38.)
Hopper
ADF
Front door release
(Inside the front door.)
Exit document stopper
ADF
Front door release
Document cover