Loading Documents On The Flatbed; When Scanning With The Flatbed - Panasonic KV-S7065C Operating Instructions Manual

Loading Documents on the Flatbed

One sheet or an entire book document can be scanned on the document glass.
Scanning documents in this way is known as "scanning with the flatbed".
Caution
≥ Do not place floppy disks or any items containing magnetic data strips on the flatbed. Magnets are located in the
flatbed cover (flatbed sheet) and may damage data stored on floppy disks and magnetic strips.

∫ When scanning with the flatbed

1
Raise the hopper tray.
2
Open the document cover.
3
Place the
document face down on top of the
flatbed glass towards the upper left
corner.
≥ If the document is bent or folded,
straighten it.
4
Match the shorter side of the document
with the left edge of the flatbed glass.
5
Match the longer side of the document
with the standard mark.
≥ If the document is slanted, it will not be
scanned properly.
scanning side of
Hopper tray
the
Standard
mark
Standard mark
Longer side
Shorter side
Document
Document cover
Document
Flatbed glass
19