Panasonic KV-N1058X Operating Manual page 84

10 Access Restrictions
To create accounts on the unit
In "User Account" (page 110), specify "User ID", "Password", and the output destinations available to the
user for push scan.
•
You can create up to 50 accounts.
•
You can specify output destinations separately for each user.
–
[System Administrator]: All output destinations can be used.
–
[User Authority]: Each output destination can be enabled / disabled.
–
[Process only items in Favorites]: Only preset conditions can be used.
–
[Process only items on the Custom Screen]: Only preset conditions on the custom screen can be used.
To use LDAP information for user accounts
Enable (set to On) "Settings" (page 110) of "LDAP Authentication".
•
You can then specify the output destinations that will be available to all users.
–
[System Administrator]: All output destinations can be used.
–
[User Authority]: Each output destination can be enabled / disabled.
–
[Process only items in Favorites]: Only preset conditions can be used.
–
[Process only items on the Custom Screen]: Only preset conditions on the custom screen can be used.
Note
You can set from [Setup Access Restrictions and User Account] and [Setup LDAP Server] in [Easy
Setup Wizard] (page 109).
Icon displayed at the top of the LCD
Icon
84
"Settings" in "User Authentication" and "Panel Lock" are set to "Off". The contents
of scan settings are not locked, and the output destinations for push scan are not
restricted.
The contents of scan settings are locked.
The contents of scan settings are not locked.
A user is logged in to the scanner.
No user is logged into the scanner.
State