Setting The Paper Thickness And Adjustment Levers; Paper Thickness Lever - Epson Stylus Color 200 User Manual

Use the following part numbers when ordering:
Paper
Special coated paper for
720 dpi
Special coated paper for
360 dpi
High-quality glossy paper
Transparency film

Setting the Paper Thickness and Adjustment Levers

Before you start printing, you should check the paper thickness
and thickness adjustment levers to make sure they are set
correctly for the type of paper or other media you are loading.
Caution:
c
Before you change the lever settings, make sure the printer is
not loading, printing, or ejecting paper.

Paper Thickness Lever

The paper thickness lever on the right side of the sheet feeder
has two settings: plain paper and thick paper. Set the lever to
the position that best suits the paper or other media you plan
to use, as shown in the following table and illustration.
Paper type
Plain or special paper
Transparencies
Envelopes or labels
Size
Letter (8.5 x 11 inches)
Legal (8.5 x 14 inches)
Letter (8.5 x 11 inches)
Letter (8.5 x 11 inches)
Letter (8.5 x 11 inches)
Paper thickness lever position
Plain paper
Plain paper
Thick paper
Part Number
S041062
S041048
S041060
S041072
S041064
Paper Handling
3-3