Epson Stylus Color 200 User Manual page 123

Glossary
auto line feed
When this feature is selected in the printer's Default setting mode, each
carriage return (CR) code is automatically followed by a line feed (LF)
code.
bidirectional printing
Printing in which the print head prints in both directions (bidirectionally).
This increases print speed but may reduce precise vertical alignment. Also
called high speed printing.
brightness
The lightness or darkness level of an image.
character table
The collection of letters, numbers, and symbols that constitute the set of
characters used in a particular language.
CMY
A method of specifying and creating colors using Cyan (blue-green),
Magenta, and Yellow.
contrast
The difference between the darkest and lightest colors in an image. The
greater the difference, the higher the contrast.
control code
A special code used to control a printer function such as performing a
carriage return or line feed.
default
A value or setting that takes effect when the equipment is turned on,
reset, or initialized.
dithering
A way of arranging dots on a page to simulate a shade or tone. See also
halftoning.
dpi
Dots per inch. Print resolution is measured in dpi. See also resolution.
driver
See printer driver.
1
Glossary