Setting Up The Printer; Selecting A Location; Attaching The Paper Support - Epson Stylus Color 200 User Manual

Setting Up the Printer

The following procedures describe how to set up and test the
printer before you connect it to your computer. Refer to the
illustrations on the inside front cover of this manual to identify
the main components while setting it up.

Selecting a Location

When choosing a location for the printer, select a surface that is
flat, horizontal, and stable. Locate the printer away from the
edge of your desk or table so that paper ejected from the front
has room to land on a flat surface.
Avoid locations subject to rapid changes in temperature and
humidity. Also keep the printer away from direct sunlight, heat
sources, and sources of electromagnetic interference, such as
the base unit of a cordless telephone.

Attaching the Paper Support

Insert the paper support into the slots at the back of the printer.
Tilt the paper support slightly forward while inserting it.
1-4

Setting Up the Printer