Epson Stylus Color 200 User Manual page 72

3. Hold down the Load/Eject button for about five seconds
until the print head moves slightly left, to the print head
unit replacement position. The Power light begins flashing.
(The print head unit returns to its home position if you do
not perform the operation in step 4 within 60 seconds.)
c
4. Raise the print head unit release lever as far as it will go.
c
release lever
5. Grasp both sides of the print head unit and carefully lift it out
of the printer. Place it on a flat, clean surface.
5-4
Maintenance
Caution:
Never move the print head unit by hand; always use the
Load/Eject button to move it.
Caution:
Do not lift up the ink cartridge clamp; the ink cartridge
and print head will become unusable.