Changing Settings - Epson Stylus Color 200 User Manual

Graphics menu settings
Setting
Color Matching *
Color Balance *
Halftoning **
* These options work as toggles, so only one appears in the menu at a time.
** There is no default setting for Halftoning; the setting is determined
automatically depending on the Document Type setting.

Changing Settings

To change a setting in the printer driver, click the menu tab you
want to see and click the setting you want to change. Use the
scroll arrows or click the appropriate radio button to choose the
desired option. Do this for each setting you want to change and
then click the Apply button at the bottom of the screen to save
your settings. Go to the other tab (if necessary) and do the same.
If you make one or more changes but then decide you want to
go back to the default settings, select Restore Defaults. You
can do this before or after applying your changes.
When you finish making changes, click OK to save the settings
and close the driver.
If you make changes before selecting Apply, and you want to
cancel them, click the Cancel button. This closes the printer
driver.
2-14
Installing and Using the Printer Software
Options
Disabled
Use Windows' matching
Use Driver's matching
Match for business graphics
Match for photo images
Match for logo
Saturation –50% - 0% - +50%
Red Strength –50% - 0% - +50%
Green Strength –50% - 0% - +50%
Blue Strength –50% - 0% - +50%
No halftoning
Error diffusion
Dithering A
Dithering B