Epson Stylus Color 200 User Manual page 57

30 sheets of EPSON high-quality glossy paper with a sheet
of plain paper beneath the last sheet in the stack; to avoid
printing on the plain paper, print your document one page
at a time. If you load a single sheet of glossy paper, place a
sheet of plain paper beneath it and print one page at a time.
Note:
If you load multiple sheets of glossy paper, the minimum top
margin is 1.2 inches (30 mm). To print with a smaller top
margin, load and print glossy paper one sheet at a time.
50 sheets of transparency film, printed one at a time, with
one sheet of plain paper beneath the last transparency in
the stack.
Follow these steps to load special paper or transparency film:
1. Push down the left edge guide lock lever; then slide the left
edge guide to the left as far as it will go.
2. Fan a stack of paper or transparencies; then tap it on a flat
surface to even the edges.
Paper Handling
3-9