Standards, Regulations And Directives; About The Appliance; Declaration Of Conformity; Use According To The Provisions Of Applicable Regulations - Bosch TRONIC 1000 T Installation And Operating Instructions Manual

Standards, regulations and directives

2 Standards, regulations and directives
The following regulations and standards must be observed
during installation and operation:
• Regulations for the electrical installation and for the
connection to the electrical supply network
• Regulations for the electrical installation and for the
connection to the remote signalling and wireless network
• National standards and regulations
3

About the appliance

3.1

Declaration of conformity

The design and operating characteristics of this product
comply with the European and national requirements.
The CE marking declares that the product complies
with all the applicable EU legislation, which is
stipulated by attaching this marking.
The complete text of the Declaration of Conformity is available
on the Internet.
3.2 Use according to the provisions of applicable
regulations
The appliance was designed for heating and storing potable
water. Please observe all country-specific regulations,
guidelines and standards for potable water.
The appliance should only be installed in closed environments.
Any other use is non-compliant with the regulations. The
manufacturer accepts no responsibility for damages resulting
from any unsuitable use
3.3

Description of the DHW tank

• Enamel-coated steel storage tank which conforms to
European standards.
• Built to withstand high pressures.
• Outer material: sheet steel and plastic.
• Easy operation.
• CFC-free polyurethane insulation material.
• Magnesium galvanic anode.
154
3.4

Accessories

1
4
Fig. 1 Accessories
1)
[1] Screws (2x)
1)
[2] Wall plug (2x)
[3] Galvanic insulation (2x)
[4] Pressure relief valve (8 bar)
1) available in some models (depending on the market)
Tronic 1000 T | Tronic 2000 T – 6721831855 (2021/03)
0010031843-001
1)
2
3