Infill Tab - Monoprice Mini Delta V2 User Manual

• Initial Layer Speed (mm/s): Sets the printing speed of the first layer of the model.
• Travel speed (mm/s): Sets the movement speed of the nozzle when not printing.
• Raft Top Print Speed (mm/s): Sets the printing speed of the top raft layer.
• Raft Middle Print Speed (mm/s): Sets the printing speed of the layers in the middle
of the raft.
• Raft Base Print Speed (mm/s): Sets the printing speed of the base raft layer.

Infill Tab

• Infill Pattern: Use the drop-down list box to select one of seven different infill
patterns. The available patterns are Lines, Grid, Triangles, Zig Zag, Concentric, Cross,
and Octet. The patterns are illustrated in the table below.
• Infill Before Wall: Check this box to print the model after filling and printing the
outline.
• Outer Before Inner Walls: Check this box to print the exterior walls before printing
the interior walls.
• Enable Adaptive Infill: For models that need to use adaptive infill for different parts,
Wiibuilder slicer can automatically create the adaptive infill rate for different parts.
36