Cura Slicing Software; Installation - Monoprice Mini Delta V2 User Manual

CURA SLICING SOFTWARE

Installation

Cura is another good slicing software program for use with the MP Mini Delta V2 3D
Printer. Unlike models sliced with Wiibuilder, models sliced with Cura cannot be previewed
on the File Information screen. For your convenience, a customized version of the Cura
installer is included on the microSD™ card for both the Windows® and Mac® OS X®
operating systems.
To install Cura, double click the Cura-4.3.0-win64-Monoprice-20210115.exe file for Windows
or the Cura-4.3.0-Monoprice-MacOS-20210115.dmg file for Mac OS X on the microSD card,
then perform the following steps:
1. The first screen is a Welcome dialog. Click the Next > button to display the License
Agreement dialog. Click the I Agree button to continue.
2. The installer will prompt you to select the directory to which Cura will be installed.
If you don't want to use the default directory, click the Browse... button, then select
your preferred directory. Click the Next > button to continue.
47