Filter Installation - Sharp FP-J30E Operation Manual

FILTER INSTALLATION

To maintain the quality of the fi lter, it is installed in the main unit and packed in plastic
bag. Be sure to remove the fi lter from the plastic bag before using the unit.
1
Remove the Back Panel.
Pull the Back Panel while holding down
the Main Unit.
2
Remove the plastic bag from the
Filter.
Pull
E-5
Be sure to remove the power plug
from the wall outlet.
3
Place the Filter within the Main
Unit.
Do not install the fi lter backwards or the
unit will not operate properly.
4
Replace the Back Panel to the
main unit.
• Do not operate the unit without the fi lter.
3
Push
Push
Bottom Tabs