Troubleshooting - Sharp FP-J30E Operation Manual

TROUBLESHOOTING

Before calling for repair, please review the list below, since the problem may not be a unit malfunction .
SYMPTOM
Dust and smoke are not removed.
A clicking or ticking sound is heard
from the unit.
The discharged air has an odor.
The Plasmacluster Ion Indicator
doesn't Light on.
AUTO RESTART
OFF
(with the unit OFF)
(simultaneously for more than 3 sec.)
If the ,
seconds, the setting is 'OFF'.
, lights flashes for 3
E-10
REMEDY (not a malfunction)
• Clean or replace the filter if they appear to be heavily
soiled. (Refer to E-8,E-9 )
• Clicking or ticking sound may be audible when the unit
is generating ions. (Refer to E-7 )
• Check to see if the filter are heavily soiled.
Replace the filter.
• Plasmacluster Air Purifiers emit small traces of ozone
which may produce an odor. These ozone emissions
are well below safety levels.
• Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
• Check to see if the Plasmacluster Ion OFF is selected.
Press for 3 seconds to light On.
• Check to see if the Light Control OFF is selected.
Press for 3 seconds to light On.
• Even when the plug is unplugged or the breaker
is thrown during operation, the unit resumes at the
previous operation mode and settings if the power
recovers.
ON
(default)
(with the unit OFF)
(simultaneously for more than 3 sec.)
If the ,
10 seconds, the setting is 'ON'.
, lights Lights up for