Operation - Sharp FP-J30E Operation Manual

OPERATION

CLEAN AIR
START
HAZE
The unit operates at HIGH fan speed for 60 minutes and then alternates between Low and High level
for 20 minutes each.
START
FAN SPEED
MED MAX
STOP
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
NOTE
• If Plasmacluster Ion is OFF, Plasmacluster Ion will not be
released.
• It is possible to switch this mode to another while operating.
However, the HAZE mode will not function after switching
mode.
NOTE
SLEEP
• The unit will operate very quietly with low fan speed.
SLEEP
Plasmacluster Ion Indicator goes off automatically.
Even though the indicator is off, Plasmacluster Ion is
dispersed into air unless Plasmacluster Ion is turned off
by .
E-6
• Select the desired fan speed.
• Unless the power cord has been unplugged,
the operation starts in the previous mode it
was operated in.