Encryption; Location Information - Tait TM9315 User Manual

■
■
■
3 When the called party responds, proceed with
your conversation.
Suspending a channel from a scanning group
If a member channel of a scan group is busy for a long
time and you do not wish to hear the conversation, you
may be able to use the function key programmed for
nuisance delete to temporarily delete it from the scan
group.
When the scan group is next selected, or after the
radio has been turned off and then on, the deleted
channel is again part of the scan group.
Alternatively, the function key programmed for
scanning may be programmed so that a short key
press turns on scanning, and a long key press
activates nuisance delete.
Press and hold the function key programmed for
■
scanning to remove the current channel from the
scanning group.

Encryption

Your radio's DMR channels may be programmed to
encrypt outgoing calls. Incoming calls will still be
decoded by your radio so long as the key required to
decode the call is stored in your radio.

Location information

Your radio may be configured to send location
information.
your radio calls a predetermined channel
e.g. your dispatcher,
your radio calls the channel where activity was
last detected, or
your radio calls the last free channel.
Operating in conventional mode 41