4
Operating in
conventional mode
This section explains how to operate your radio on a
conventional network (digital and analog).
Notice The radio may be switched between
conventional and trunked modes using a 'change
mode' programmable function key. This function key
should be programmed under both conventional, and
trunked key settings, to allow the modes to be
switched in both directions. In conventional mode, the
function key LED is off.
This section covers:
Selecting a channel or group
■
Making a call
■
Making an emergency call
■
Making an individual call
■
Making a preset call
■
Resending calls automatically
■
Sending a status message
■
Transmitting at low power
■
Using monitor and squelch override (on analog
■
channels)
Bypassing the repeater (on analog channels)
■
Receiving a call
■
Using the radio in different repeater areas
■
Scanning a group of channels
■
Encryption
■
Location information
■
Operating in conventional mode
31