The Dishwashing Results Are Not Satisfactory - Hanseatic HGVI6082D14J7713GS User Manual

Page EN-36 Troubleshooting table

The dishwashing results are not satisfactory

Problem
There are residues or
streaks on the dishes.
The dishes are not
completely clean.
Possible cause
The rinse aid is incorrectly
dosed.
There is no dishwasher salt.
The dishwasher salt is
clumpy.
There are food scraps which
are encrusted onto the
dishes.
The dishes have not been
stacked optimally.
You have selected the
incorrect dishwashing pro-
gramme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not
rotate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Solution
Adjust the dispensed dose
(see „Changing the rinse aid dose"
on page EN-15).
Add dishwasher salt (see „Adding
dishwasher salt" on page EN-16).
Stir the dishwasher salt using the
end of a spoon or similar.
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see „Loading the
dishwasher" on page EN-17).
Select the correct dishwashing
programme (see „Programme ta-
ble" on page EN-21).
Use the correct dosage of
dishwasher detergent (see „Pro-
gramme table" on page EN-21).
Ensure that no dishes are imped-
ing the motion of the spraying arm.
Clean the nozzles (see „Checking
and cleaning the spraying arms"
on page EN-27).