Adjusting The Mower; Dismounting The Mower Deck - Kubota ZG222A Operator's Manual

10 MOWER MOUNTING
7. Adjust the lift pedal to the lowest position and pull
down the lift links.
8. Attach the lift links to the mower deck with attaching
hardware.
(1) Lift link
(2) Clevis pin, Plain washer, Snap ring
9. Install universal joint.
Pull back the coupler of the universal joint.
Push the universal joint onto the PTO shaft until the
coupler locks.
A Tug the universal joint backward and forward to make
sure it is locked securely.
(1) Universal joint
(2) Coupler
(A) "PULL"
10. After mounting the mower, check the mower level. If
necessary, adjust the mower level and anti-scalp
rollers.

ADJUSTING THE MOWER

See "OPERATING THE MOWER" and "ADJUSTMENT"
section.

DISMOUNTING THE MOWER DECK

For dismounting the mower deck, reverse the above
procedures.