14
MOWER ADJUSTMENTS
ADJUSTING THE MOWER LINKS
1. Park the machine on a firm, flat and level surface.
2. Tire pressure must be correct. (See Tractor Operator's
Manual.)
3. Move the hydraulic control lever rearward to raise the
mower to the highest position.
4. Stop the engine and remove the key.
5. Adjust the left side links with bolt so that the clearance
(L) is as follows.
(1) Bolt
(2) Lock nut
(3) Stopper
(4) Rear link
(A) Refer to Fig.A
(B) Refer to Fig.B
(1) Rear link
(L) 0 to 0.5 mm
(2) Stopper